Installation Instructions - Infiniton WCL-6B Manual De Usuario

INSTALLATION INSTRUCTIONS

Before putting your service cellar into service
● Remove all inner and outer packaging components.
● Check that none of the following parts are missing:
- 3 removable shelves
- 1 operating manual
● Before connecting your device to a power supply,
allow it to stand upright for about 2 hours. This
reduces the risk of malfunction of the refrigeration
system due to handling during transport.
● Clean the inner surfaces of the unit with a soft
cloth and warm water.
● Place your unit on a floor strong enough to
support the weight of the fully filled unit.
● Make sure the unit is level by adjusting the front
feet underneath the unit. Make sure that the
cellar rests on its feet in a stable manner.
● Install the appliance away from direct sunlight
and heat sources (radiator, hot plate, etc.). Direct
sunlight can damage the unit's coating and heat
can increase its power consumption. If the
ambient temperature is extremely cold or hot, this
may prevent the unit from operating properly.
● The unit is not designed to be installed in a
basement or cellar.
● This unit is designed exclusively for indoor use.
- 6