Troubleshooting - Evolution R11 VAC Li Instrucciones Originales

www.evolutionpowertools.com

TROUBLESHOOTING

PROBLEM
1. Battery not installed properly.
Vacuum can
not run
3. Internal components too hot.
Loss of suction,
wet pick-up
Loss of suction,
dry pick-up
WARNING: To reduce the risk of injury from
moving parts and/or electrical shock, remove
battery from the machine before performing
troubleshooting checks. Minor problems often
can be fixed without calling customer service.
POSSIBLE CAUSE
2. Battery not charged.
1. Full tank
2. Clogged hose
3. Clogged filter
1. Full tank
2. Clogged hose
3. Clogged filter
11
CORRECTIVE ACTION
1. Check battery installation.
2. Check battery charging requirements.
3. Allow tool to cool down.
1. Drain and clean tank
2. Remove hose and clean debris
3. Clean or replace filter
1. Empty and clean tank
2. Remove hose and clean debris
3. Clean or replace filter
EN