All manuals and user guides at all-guides.com
Battery Replacement
Before opening the case, remove the test leads from the circuit and shut off the unit.
Failure to observe this warning can result in severe injury or death.
Do not rotate battery compartment past 90°. Retention clips will break.
1.
Remove the leads from the circuit. Turn the unit OFF.
2.
Carefully push the battery compartment out by inserting a screwdriver in the slot located
on the side of the unit.
3.
Replace the battery (observe polarity).
4.
Slide the battery compartment back into the unit.
Insert
screwdriver
here.
Push in this
direction.
14
Note: Do not rotate
past 90 ° or retention
clips will break.