Factory Reset; Software Update; Setup Wizard; Time/Date - Albrecht Audio DR 895 CD Manual

14.5. Factory reset

A factory reset resets all user settings to default values, so that time and date, network configuration
and presets are lost. However, the DR 895 CD's current software version is maintained.
EN

14.6. Software Update

From time to time, software upgrades may be created with bug fixes and/or additional features. You
can either check manually or set DR 895 CD to check periodically automatically (this is the default).
If newer available software is detected, you will be asked if you want to go ahead with an
update. If you agree, the new software is then downloaded and installed. After a software upgrade,
all user settings are maintained.
NOTE: Before starting a software upgrade, ensure that DR 895 CD is plugged into a stable main
power connection. Disconnecting power during an upgrade may permanently damage the unit.

14.7. Setup Wizard

Setup wizard

14.7.1. Time/Date

Display format
Start now?
Select 12 or 24 as the time format.

14.7.2. Auto-Update

The time and date can be updated manually or automatically from
YES NO
DAB, FM or your network. Auto-update works with data sent over
DAB, FM or the Internet. The clock is only updated when in a
corresponding mode, so it is best to select a mode you use regularly.
DAB and FM use time signals broadcast with radio transmissions. Network uses a time signal sent
from the Internet Radio portal when being in any network-connected mode.

14.7.3. Time Zone, Daylight Saving Time

Set your time zone. If your country uses the daylight saving time and it is in effect, turn on the
Daylight saving option.

14.7.4. Manual Update

If you set "No update", the wizard prompts you to set the time and date manually. The date and
time are displayed as dd-mm-yyyy (day-month-year) and hh:mm (hour:minutes).
The active value is flashing. Adjust each value with the navigate knob or ▲/▼ on the remote
control. Once the value is set, press OK or ◄/► to continue setting the next value.

14.8. Info

View the firmware version and the radio ID.

14.9. Privacy policy

Here you will find the link for the current version of the privacy policy. Use a PC or mobile device to
access the statement.

14.10. Backlight

You may change the backlight for On level to High, Medium or Low and for the Dim level to Medium
or Low. Also adjust the Timeout duration after which turns the radio to Dim level after it has not been
used.
40 English