LISTENING TO USB
USB PLAYBACK
1. Press and hold the PLAY/PAUSE/USB button to select USB playing mode while the
FUNCTION switch on main unit is set to AUX/USB/CD/MP3 position.
2. Connect the USB to the USB INPUT. The CD will display total number of tracks stored inside
the USB.
3. Press the PLAY/PAUSE/USB button to start playing. Press the PLAY/PAUSE/USB button
once again to temporarily stop. The track number will flash.
4. Press the STOP button to stop playing. The display will show total number of tracks.
5. Proceed repeat play (repeat 1/repeat all/repeat folder)/program play/random play/skip up
and down operation as the same described in above "USING THE CD/MP3".
Note: To exit USB operation, press and hold PLAY/PAUSE/USB button to return the CD mode.
CAUTION:
Do not use any USB extension cable for connecting the USB stick which may cause harmful
interference
In case of malfunction due to electrostatic discharge, just reset the product (reconnect of
power source may be required) to resume normal operation.
AUX-IN OPERATION
This unit has provided special AUX-IN jack, through this jack other audio sources can be
connected to this unit and be amplified.
1. Set the FUNCTION switch to AUX/USB/CD/MP3 position.
2. Connect the audio cable into the AUX-IN jack and the other end connect to the AUDIO OUT
jack of the external audio source. The unit will change to AUX mode automatically.
3. Adjust the volume of the main unit to your desired level.
4. Press PLAY of the external audio source (eg. MP3 player) to start playback.
SPECIFICATIONS
CD SECTION
Channels:
Optical pick-up:
Frequency Response:
RADIO SECTION
Receiving Band:
Tuning Range:
GENERAL
Output Power:
Aux jack:
Power Source:
Power Consumption:
Note: Specifications are subject to change for continuous improvement without prior notice.
All manuals and user guides at all-guides.com
2 channels
3 beams laser
100Hz - 16KHz
AM/FM ST.
AM:
530 - 1600 KHz
FM ST.: 88
- 108
1.5W x 2
3.5mm
AC 110/220V ~ 60/50Hz
DC 9V 6 x 1.5V UM-1 / D size
15 W
6
MHz