Spypoint SOLAR-DARK Guia De Inicio Rapido página 4

The specifications and characteristics of similar models
may vary. Refer to the website or packaging for details.
PREPARATION
SELECT A POWER SOURCE
The camera was designed to be powered by an internal
rechargeable battery by means of an integrated solar panel.
This power source is generally sufficient for the proper
operation of the device.
It is recommended to charge the internal battery for 24 to 48 hours
before the first use.
Plug the 12 V USB cable in the 12 V socket under the camera.
Then, connect the other end of the cable to the USB port of
your computer or to a 5 V wall socket charger (not included).
When charging via the 12 V USB cable (included), make sure
the camera is turned OFF and the solar panel is covered or
facing down so that it does not interfere with the USB charging
process.
While the camera is in use, if the internal battery charge becomes
insufficient, the camera will go into standby mode. Once the
solar panel has recharged the battery, the camera will restart
by itself with the same mode and configurations as before.
4