SE Electronics RNR1 Manual Del Usuario página 6

Technical Specifications (RNT)
Capsule
Polar patterns
Tube complement
Frequency range
Sensitivity
Gain
Max. SPL (0.5% THD)
Equivalent noise level
Dynamic range
Signal-to-noise ratio
Low cut filter
Electrical impedance (floor box output)
Recommended load impedance
Connectivity
Power requirement
Dimensions
Weight
Hand-crafted 1" diaphragm true condenser capsule
9 (omni, cardioid, figure-8 with three additional steps between each)
1x 12AU7 (ECC82)
20 – 20,000 Hz
16 mV/Pa (-36 dBV)
-12 / 0 / +12 dB, switchable
151 dB
SPL
18 dB(A)
133 dB
76 dB
40 / 80 Hz, 12 dB/Oct, switchable
30 Ohms
>2k Ohms
3-pin male XLR connector
Floor Box / PSU (included)
Microphone
Diameter 62 mm (2.44 in.) Length 240 mm (9.45 in.)
Floor Box / PSU
356 x 135 x 100 mm (14.02 x 5.31 x 3.94 in.)
Microphone
989 g (34.90 oz.)
Floor Box / PSU
3905 g (137.79 oz.)
6