Intended Use; Possible Misuse - Hilti SJT 6-22 Manual Del Usuario

3 Description
3.1 Product overview
3.2

Intended use

The product described is a hand-held cordless orbital-action jig saw. It is designed to be used for cutting
plastic, wood and metal as well as drywall board and gypsum fiberboard.
The product is equipped with a removable connector for an optional vacuum cleaner / dust removal hose.
This connector is designed to fit standard suction hoses. In order to connect the suction hose to the product,
use of a suitable adapter may be necessary.
• For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For optimum performance,
Hilti recommends the batteries stated in the table at the end of these operating instructions for this
product.
• For these batteries, use only Hilti chargers of the type series stated in the table at the end of these
operating instructions.
• Use this product only with saw blades equipped with a T-shank.
3.3

Possible misuse

• Use of the product to cut off tree branches or to cut the trunk of a tree is not permissible.
• Use of the product to cut hazardous materials is not permissible.
• Use of the product in a damp or wet environment is not permissible.
3.4 Status indicators of the Li­ion battery
Hilti Nuron Li-ion batteries can indicate state of charge, fault messages and the battery's state of health.
3.4.1 Indicators for state of charge and fault messages
WARNING
Risk of injury by a falling battery!
▶ If the release button is pressed with a battery inserted in the product, subsequently check that the battery
is correctly re-engaged and secure.
Short-press the release button of the battery to get whichever of the following status indications is applicable
at the time.
State of charge and, if applicable, faults are indicated constantly as long as the connected product is
switched on.
6 English
1
On/off switch
@
Grip
;
Stroke rate regulator thumbwheel
=
Battery
%
Air vents
&
Installation opening for accessories
(
Saw blade release lever
)
Blade holder
+
Guard
§
Contact guard
/
Saw blade
:
Anti-splinter insert
∙
Orbital-action adjustment lever
$
Base plate
£
Cutting angle adjustment scale
|
Catches
¡
Suction adapter
Q
Release button, battery
W
Battery status indicator
E
2264219
*2264219*