Battery Indicators; Charging The Battery & Bluetooth Mode - KLIM SHIFT Manual Del Usuario

CHARGING THE BATTERY

Battery indicators

The light on the spacebar indicates the status of the battery:
White light: full battery.
Yellow light: charging.
Red light (flashing): low battery.
When the keyboard battery is low, connect the cable to your
computer or an external power source (such as a USB charger)
to charge your keyboard. You may continue to use it while it
charges.
Tip: lowering the brightness or switching off the RGB lighting
completely significantly increases the battery life and reduces
the frequency of charges.
Power saving function
In order to preserve battery life, the keyboard lights turn off
after 7 minutes of inactivity while on a wireless connection
(2.4G or Bluetooth). The keyboard enters a stand-by mode after
30 minutes of inactivity. Ending any wireless connection also
puts the keyboard on stand-by mode.
BLUETOOTH MODE
Note: for basic pairing instructions, check the Quick Start Guide in
the previous page.
You can pair up to 3 devices at the same time, and quickly switch
between them, by following the pairing steps detailed in the quick
start guide with each of the available keys (Q, W, E).
Each key has a different light indicator (blue, cyan, purple). While
pairing mode is active, the light flashes. Once the keyboard has been
paired with the device on the selected key (Q, W or E), the light will
become still and then turn off. If pairing is not completed within 2
minutes, the pairing process stops and the light turns off.
When multiple devices are paired, simply press FN + Q/W/E to select
each one. The corresponding light blinks once and then turns off.
Note: depending on your Operating System, one or two device names
may appear (KLIM Shift 3.0 or KLIM Shift 5.0). When available, it is
recommended to select 5.0.
3
ENGLISH