cecotec CONGA POPSTAR 15300 ASH STEEL Manual De Instrucciones página 8

Do not use the product to vacuum liquids nor burning objects.
Do not vacuum sharp objects, toner dust, or plaster.
Allow dust to cool down to at least 50 ºC before vacuuming it.
The device is specifically designed to remove warm(‹ 60ºC) or
cold (not burning) ash.
Do not try to exceed the capacity of the tank. Stop using
the appliance once the dust container is full and empty it
accordingly.
Do not put any objects into the openings of the appliance. Do
not use the appliance if its openings are blocked. Do not restrict
the airflow through the appliance. Keep all openings free of
dust, lint, hair, and anything that may reduce the airflow.
If the suction openings of the unit or the flexible tube are
blocked, switch off the vacuum cleaner and remove the blocking
substance before starting the unit again.
Do not use the appliance if the accessories or parts are not
properly fastened.
Make sure the nozzle or the brush do not touch the furniture's
surface.
Do not use the appliance if the accessories or parts are not
properly fastened.
Do not vacuum flour or cement in order to avoid overloading
the tank.
Do not use any accessory that has not been recommended by
Cecotec, as they might cause injuries or damage.
Keep hair, loose clothing, fingers, and other parts of the body
away from the openings and moving parts of the appliance.
Do not leave the product unsupervised during operation.
Unplug the device after use and when you leave the room
where it is installed.
Do not try to repair the device by yourself. Contact the official
Technical Support Service of Cecotec for advice.
8
CONGA POPSTAR 15300 ASH STEEL