Jensen CD511K Operacion página 3

CD511K
Beep
1
SEL
>2 Sec
2
SEL
Program Sequence
Beep off > Beep 2nd > Beep on
Display
BEEP OFF
BEEP 2ND
BEEP ON
5598 CD511K_Eop.p65
1. Press and hold the
SEL button for more
than two seconds.
Current Beep setting
appears in the
display.
2. Use the volume ring
to make changes to
the Beep setting.
Program
beep sound off
beep sound enabled
when second function
key is pressed
beep sound on
3
Initial Volume
Use INVOL to set the loudest volume at
which the unit will turn on.
1. Press and hold the
1
SEL
>2 Sec
2. Press SEL button
2
SEL
3. Use the volume ring
3
SEL
Display Program
INVOL 0 minimum
INVOL 45 maximum
Note:
The unit will turn on at the INVOL limit unless
the volume level was adjusted below the
INVOL limit during last operation, then the
unit will turn on at the lower level.
For example: If the INVOL is set to 20 and
the volume level was adjusted to 15 during
last operation, the unit will turn on at 15. If the
INVOL is set to 20 and the volume level was
adjusted to 35 during last operation, the unit
will turn on at the INVOL setting of 20.
3/23/00, 2:15 PM
®
SEL button for
more than two
seconds.
one time. INVOL
appears in the
display.
to set the initial
volume limit.
3