User Interface; Inputs And Outputs; Power Supply Specifications (Consumption) - dB Technologies VIO S115 Manual De Uso

English
PROCESSOR
Internal processing:
A/D D/A converter:
Limiter:

USER INTERFACE

Indicator LEDs:
Status LEDs (RDNet network):
Controls:

INPUTS AND OUTPUTS

Power supply inputs and links:
Audio inputs:
RDNet inputs/outputs:
Audio outputs:
USB (firmware update):

POWER SUPPLY SPECIFICATIONS (CONSUMPTION)

Power consumption at 1/8 power in
medium use conditions (*):
Power consumption at 1/3 power in
medium use conditions (**):
Power consumption with speaker on but
no signal (idle):
Inrush current:
Total permissible current and power in a
linked system:
Maximum number of modules per
power supply line:
:
* NOTE FOR THE INSTALLER Values refer to 1/8 power under normal operating conditions (music program with rare or no clipping). For any configuration type,
we recommend considering them to be the minimum values for dimensioning.
** NOTE FOR THE INSTALLER: Values refer to 1/3 power under heavy operating conditions (music program with frequent clipping and limiting). We recommend
dimensioning in accordance with these values for professional installations and tours.
VIO S115
Limiter, Signal, Status, ON
Link, Active, Remote Preset Active
Polarity (Normal, Reversed), Mode (Link, Xover), Xover frequency
(from 70 to 120 Hz), Sub attenuation (from 0 to -15 dB, User/Service,
Mute), Delay (from 0 to 5 ms)
Data In / Data Out (etherCON® connectors)
1.79 A@115V AC 1.20 A@230V AC
3.75 A@115V AC 2.50 A@230V AC
0.40 A@115 V AC 0.22 A@ 230 V AC
13.5 A - 3100 W (220-240V)
15.5 A - 1700 W (100-120V)
1+5 (220-240V~) / 1+3 (100-120V~)
DSP 96 kHz
24 bit / 96 kHz
Peak, RMS, Thermal
PowerCON® True1
XLR
XLR Link OUT
type B USB
21.04 A
Cod. 420120357 REV. 1.0
39