Dicota Beat Manual De Instrucciones página 5

e. Back to Game Controller "Properties" page, and click on "OK" or
All manuals and user guides at all-guides.com
"Apply" to complete the calibration procedure.
You are now ready to start up the game software for fun.
Important:
• Once the gamepad is properly plugged to your PC but it seems does
not work with the game, please enter the Game Controller Setting in
Control Panel and select "Advanced" page to check whether the USB,
2-axis 8-button gamepad ID is the "Joystick 1" or not.
• Note: When there is only one game controller connected to your PC,
this gamepad must be the "Joystick 1" towork properly. If the game-
pad is not "Joystick 1", please remove it from the Game Controllers
Setting in the Control Panel, as well as other installed joysticks. Subse-
quently re-install the gamepad and complete the calibration procedure,
then it will work as usual.
Attention
1. Make sure your software supports the Game Controller/Joystick.
2. Not every game requires all functioning buttons (8 buttons in total) on
your gamepad. If you find some buttons do not work inside the game,
please check the game settings.
3. The function of the gamepad buttons may vary in different games.
Before changing the game settings inside the game, always read the
game manual carefully to configure the best game settings.
4. Your Mini Gamepad needs little care and services. You may clean
it with a damp cloth periodically. Do not use abrasive cleaners of
any type and do not spray liquid cleaners directly on your game-
pad. Any fluid leaks inside the joystick may cause unexpected
damages.
5