Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Stereo Headphones
Operating Instructions
Manual de instrucciones
MDR-MA100
Tactile dot
Stereo headphones
Features
40 mm driver units for powerful, expressive sound
Open headphones with natural sound field
Comfortable fitting with fabric earpads
How to use
These headphones are for use with a stereo mini jack.
How to wear the headphones (see fig. )
Extend the headband to adjust the length.
4-295-250-11(2)
Wear the headphone marked on your right ear, and the one marked on your left
©2011 Sony Corporation
ear.
Printed in Thailand
There is a tactile dot on the unit marked to distinguish the left side.
How to confirm the model name (see fig. )
The location of the model name ("MDR-MA100") is shown in the illustration. If you
have a question about the product, check the model name beforehand to let us know
your model.
Note
When checking the model name, do not move the headphones beyond its normal range.
Specifications
Type:
Driver unit:
Power handling capacity: 1 ,000 mW (IEC*)
Impedance:
Sensitivity:
Frequency response:
Cord:
Plug:
Mass:
Supplied accessory:
* IEC = International Electrotechnical Commission
Design and specifications are subject to change without notice.
Precautions
Listening with headphones at high volume may affect your hearing. For traffic safety,
Do not subject the headphones to excessive shock.
Handle the driver units carefully.
Do not put weight or pressure on the headphones as it may cause the headphones to
The earpads may deteriorate due to long-term storage or use.
Do not leave the jack plug dirty otherwise the sound may be distorted.
Clean the headphones with a soft dry cloth. Do not blow on the units when cleaning.
Do not leave the stereo headphones in a location subject to direct sunlight, heat or
English
Open, dynamic
40 mm, dome type (CCAW Voice Coil)
40 Ω at 1 kHz
100 dB/mW
12 Hz – 22,000 Hz
2 m (78 3/4 in), Y type
Stereo mini plug
Approx. 170 g (6 oz) without cord
Operating Instructions (1)
do not use while driving or cycling.
deform during long storage.
Do not allow the plug to become dirty, otherwise the sound may deteriorate.
moisture.
Optional replacement earpads can be ordered from your nearest authorized Sony
retailer or www.sony.com.
This mark is valid only in those European countries where it is legally
applicable.
Publicidad
Manuales relacionados para Sony MDR-MA100
Resumen de contenidos para Sony MDR-MA100
- Página 1 How to use These headphones are for use with a stereo mini jack. How to wear the headphones (see fig. ) Extend the headband to adjust the length. 4-295-250-11(2) Wear the headphone marked on your right ear, and the one marked on your left ©2011 Sony Corporation ear. Printed in Thailand There is a tactile dot on the unit marked to distinguish the left side. MDR-MA100 How to confirm the model name (see fig. ) The location of the model name (“MDR-MA100”) is shown in the illustration. If you...
- Página 2 Estos auriculares son para utilizar con una minitoma estéreo. Punto táctil Utilización de los auriculares (consulte la fig. ) Extienda la diadema para ajustar la longitud. Coloque el auricular marcado con en la oreja derecha y el que está marcado con en la izquierda. Hay un punto táctil en la unidad marcada con una para diferenciar el lado izquierdo. Confirmación del nombre del modelo (consulte la fig. ) En la ilustración se muestra la ubicación del nombre del modelo (“MDR-MA100”). Si tiene alguna pregunta sobre el producto, averigüe el nombre del modelo primero para decirnos cuál es su modelo. Nota Cuando verifique el nombre del modelo, no mueva los auriculares más allá de su rango normal. Especificaciones Tipo: Abiertos, dinámicos Unidad auricular: 40 mm, tipo cúpula (Bobina de voz de cable de aluminio encobrado (CCAW)) Capacidad de potencia: 1.000 mW (IEC*)