Famastil F-POWER FST201-m Manual De Instrucciones página 21

power tool while you are tired or under
the influence of drugs, alcohol or
medication. A moment of inattention
while operating power tools may result
in serious personal injury.
Use safety equipment. Always wear
10
eye protection. Safety equipment such
as dust mask, non-skid safety shoes,
hard hat, or hearing protection used
for appropriate conditions will reduce
personal injuries.
11 Avoid accidental starting. Ensure
the switch is in the off position before
plugging in. Carrying power tools with
your finger on the switch or plugging
in power tools that have the switch on
invites accidents.
12 Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a
rotating part of the power tool may
result in personal injury.
Do not overreach. Keep proper footing
13
and balance at all times. This enables
better control of the power toolin
unexpected situations.
Dress properly. Do not wear loose
14
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
POWER TOOL USE AND CARE
Do not force the power tool. Use the
15
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it
was designed.
All manuals and user guides at all-guides.com
Do not use the power tool if the switch
16
does not turn it on and off. Any power
tool that cannot be controlled with the
switch is dangerous and must be
repaired.
Disconnect the plug from the power
17
source before making any adjustments,
changing accessories, or storing power
tools. Such preventive safety measures
reduce the risk of starting the power
tool accidentally.
18
Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or
these instructions to operate the power
tool. Power tools are dangerous in the
hands of untrained users.
Maintain power tools. Check for
19
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power
tools operation. If damaged, have the
power tool repaired before use.
Many accidents are caused by poorly
maintained power tools.
Use the tool, in accordance with
20
these instructions and in the manner
intended for the particular type of
power tool, taking into account the
working conditions and the work to
be performed. Use of the power tool
for operations different from those
intended could result in a hazardous
situation.
SERVICE
21
Have your power tool serviced by
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained.
21