VERTBAUDET 70323-00119 Manual De Utilización página 12

6. Place the lid on top of sterilizer base. Please ensure that the lid fits securely
on the base without any gaps where the lid and base meet.
7. Plug the appliance into the power outlet.
8. Press the On/Off button behind the appliance once; then press the start
button on the front of the appliance.
Please note: by default, the sterilisation cycle runs for approximately 10
minutes. If the steriliser contains less than 100 ml, the sterilisation duration
may not suffice to eliminate all bacteria from baby bottles and accessories.
Cleaning
 Always unplug your product before cleaning.
 Do not immerse the base, the supply cord or the plug in water or
other liquids.
 Do not clean base under water tap.
 Use a soft damp cloth to clean the base.
 Never use abrasive pads to clean the plastic parts of the machine.
 The lid, accessory steam set can be cleaned in hot soapy water.
 Mineral residue, particularly in hard water areas, may deposit on the
stainless steel heating plate after a few sterilization cycle. To avoid
scale build up, wipe the surfaces with a soft moist cloth after each
operation.
 Deposits can be removed with proprietary scale removers or by
leaving 30ml water and vinegar solution (1 part vinegar to 4 parts
water) on the heating bowl for approximately 30 minutes. The bowl
should then be wiped clean with a clean, dry cloth.
discoloration spots may remain after cleaning with a vinegar solution,
but these are harmless.
 Do not use abrasives or solvents for cleaning; they may damage the
appliance and the surface of the heating bowl.
Some