Tuning On The Player And Tv; Enter Setup Menu; The Navigation System In The Setup; General Setup - Vieta Home VH-MS150BK Manual De Usuario

Turning on the player and TV
1. Connect the player to your TV/PC Monitor /Projector,
amplifier (if available) and power source.
2. Turn on the player by pressing the power button on
the front panel.
3. Turn on the TV and switch it to the appropriate video
mode (composite video input, S-video input or Scart
input).
4. If you connect the TV via component video input
and get no image on the TV screen, please press
"SETUP" button on remote, find "TV mode" under
"Video" in menu, select "P-Scan" and press "Enter",
then the TV shows the image.
5. If you get a black/white image on the TV screen,
click"SETUP" on the remote and find "TV TYPE"
under "Preference" in menu and switch the player to
the appropriate TV system (PAL,NTSC)
6. You should now be able to see the welcome screen
on the TV.

Enter setup menu

1. Click the "SETUP" button on the remote control.
2. You will see the general setup page displayed on
the screen.

The navigation system in the setup

1. Use the navigation keys to move the menu cursor
left/right/up/down.
2. Left button – back to the previous menu.
3. Right button – enter sub-menu.
4. Enter – make selection.
5. Setup – enter the menu / exit the menu.

General setup

TV Display
Sets the aspect ratio of this player's output image.
Optional settings: Normal/PS (Pan-scan), Normal/LB
(Letterbox format), Wide (16:9 format).
Angle Mark
When a DVD title with multi-angle is played, the user
will be able to view a particular angle. Optional settings:
On/off
OSD Lang
This menu is used to set the prompt language on
the screen. Optional settings: English, Portuguese,
Spanish. The default is Spanish.
Captions
Play the enclosed captions on some DVD titles.
Optional settings: On/off
Screen Saver
Open or close the screen saver function. Optional
settings: On/ off
Last Memory
When playing DVD/CD/VCD, after you press the
POWER button, the player will remember the position
of current program playing . Next time you turn on the
machine, you just need to click the PLAY button and the
player will jump to the "last memory" position. Optional
settings: On/off
25