ENGLISH
The two-way radio intrinsically safe is designed for those users who demand the ultimate
performance for their business critical communications.
Your radio can be configured for Digital or Analogue channels, or both, and to meet your exact
requirements the radio may be customized (consult with the manufacturer).
Radio
Rapid charger
Rechargeable Li-Ion battery
Spring loaded belt clip
High efficiency antenna
Attaching and removing accessories
To attach an accessory, remove the accessory cover by unscrewing the locking screw
anticlockwise (leave cover attached or store in a safe place).
Plug the accessory into the socket, then carefully tighten the locking screw clockwise until
finger tight (do not over-tighten or use any implement).
To remove an accessory, unscrew the locking screw of the accessory by hand in an
anticlockwise direction.
Ensure you refit the accessory socket cover (the radio is not submersible without the socket
covered).
Battery charging
1. Connect the AC adapter to the charger pod and plug in.
2. Turn the radio off.
3. Insert the battery pack into the charger pod, either with or without the radio attached. The
charger LED status light changes to red and charging begins.
4. When charging is complete the charger LED status changes from red to green. A fully
discharged battery pack will take approximately 3 hours to recharge.
A flashing red LED on the charger indicates there is a problem with the battery. Remove the
battery from the charger and consult with the manufacturer.
6
INTRODUCTION
PACKING LIST
OPTIONAL ACCESSORIES
BATTERY INFORMATION