Cleaning And Maintenance; Technical Specifications - KUULAIRE PACKA54 Manual De Usuario

LOCATION
USE AND OPERATION
PARTS DESCRIPTION
▲
!
ELECTRICAL
ON/OFF
1. Connect the cord to a power outlet. Alternating
amber/red pilot light will start flashing and the display
ASSEMBLY INSTRUCTIONS
is animated. The unit is in STANDBY.
2. Press the ON/OFF button to turn the unit on. Indicator
light will illuminate. To turn off, press
the POWER button again.
TROUBLESHOOTING
When the ON/OFF button is pressed, the cooler will start
at level 2 speed (medium) then drops to level 1 speed
(Low)
SPEED
WARRANTY
Press the SPEED button to select the desired fan speed.
The selected fan speed indicator LED light
will light up. Fan speed settings are 1( LOW) - 2
(MEDIUM) - 3 (HIGH).

CLEANING AND MAINTENANCE

MODE:
Press the MODE button to select the desired fan mode.
The selected fan mode indicator LED light
will light up. When SLEEP or NATURAL is selected, air

TECHNICAL SPECIFICATIONS

speed will randomly vary.
COOL
REMOTE CONTROL
USE AND OPERATION
▲
!
All manuals and user guides at all-guides.com
ON/OFF – start or turn off the unit
Speed – 1 (Low)/2 (Medium)/3 (High)
Swing – automatic swing of louvers
Mode – Sleep/Natural/Normal
Timer – timer function up to 990 minutes
To use the unit as an evaporative cooler, adjust the
WATER FLOW CONTROL KNOB on the side
panel. Water will be pumped up to the water
distributor compartment and start wetting out the
cellulose cooling media in the rear of the unit. After
approximately three minutes, as the pad becomes
saturated, the air from the outlet should be cool. Turn
the knob to OFF position when 'Cool' function is not
desired.
SWING:
Press the SWING button to direct the air stream. The
vertical louvers will begin to move automatically
from side to side. The indicator LED will come on. To
adjust the vertical direction of air flow,
adjust the horizontal louvers manually.
TIMER
The unit comes with an 990 minutes timer. To set, press
the TIMER button to the desired operation
time. The selected time will be displayed. When the
pre-selected time has elapsed, the unit will
automatically shut off.
ION:
Press ION button once to start. LED light will
illuminate. Unit will release negative ions for air
purifying function. Press again to stop the function.
Port-A-Cool, LLC • 709 Southview Circle • Center, TX 75935
www.kuulaire.com • 1-888-999-6511
3