Safety Instructions - Scheppach DC100 Traducción Del Manual De Instrucciones Original

• The machine is intended for commercial use, for ex-
ample in hotels, schools, hospitals, factories, shops,
offices and rental businesses.
• Please observe that our equipment was not de-
signed with the intention of use for industrial pur-
poses. We assume no guarantee if the equipment
is used in industrial applications, or for equivalent
work.
• Check the filter regularly for damage. Replace dam-
aged filters! Regularly check the housing seal and
the seals for the filter and dust bag.
• When using the cleaning nozzles, do not suck up
any foreign bodies such as screws, nails, pieces of
plastic or wood.
• The machine may only be operated with original
parts and original accessories from the manufac-
turer.
• The suction of wood dust and wood chippings in
commercial areas is not permitted.
• The suction of flammable liquids or dusts hazardous
to health is not permitted.
• Only suitable for collecting chips (not dust).
• Any use beyond this is improper use. The manufac-
turer is not responsible for the resulting damages;
the user solely bears the risk.
• The safety, operating and maintenance specifica-
tions of the manufacturer, as well as the dimensions
specified in the technical data, must be observed.
• The applicable accident prevention regulations and
the other generally accepted safety rules must be
observed.
• The machine may only be used, maintained or re-
paired by persons who are familiar with it and have
been informed of the dangers. Any liability of the
manufacturer for damages resulting from arbitrary
changes to the machine is excluded.
• The machine may only be operated with original ac-
cessories from the manufacturer.

5. Safety instructions

m Attention! The following basic safety measures
must be observed when using electric tools for pro-
tection against electric shock, and the risk of injury
and fire. Read all these notices before using the elec-
tric tool and store the safety instructions well for later
reference.
Safe work
• Warning: When power tools are used, basic safety
precautions must be followed to eliminate the risks
of fire, electric shock and injury to persons.
• Follow all these instructions before and while work-
ing with the machine.
• Store these safety instructions safely.
• Protect yourself from electric shock! Avoid physical
contact with earthed parts.
• Unused devices should be stored in a dry, locked
place and out of reach of children.
• Keep tools sharp and clean in order to be able to
work better and more safely.
• Check the cable of the tool regularly and have it re-
placed by a recognised specialist when damaged.
• Check extension cables regularly and replace them
when damaged.
• Only use extension cables that have been approved
and appropriately labelled for use outdoors.
• Pay attention to what you are doing. Remain sen-
sible when working. Do not use the tool when you
are fatigued.
• Do not use any tools on which the switch cannot be
switched on and off.
• Warning! The use of other insertion tools and other
accessories can entail a danger of injury.
• Pull out the mains plug for any adjustment or repair
tasks.
• Pass the safety instructions on to all persons who
work on the machine.
• Before commissioning, check that the voltage on the
device type plate corresponds to the mains voltage.
• If an extension cable is required, make sure that its
cross-section is sufficient for the current consump-
tion of the device. Minimum cross section 1.5 mm
• Only use the cable drum when unrolled.
• Check the mains connection cable. Never use any
faulty or damaged connection cables.
• Do not use the cable to pull the plug out of the outlet.
Protect the cable from heat, oil and sharp edges.
• Do not expose the machine to rain and do not use
the machine in a damp or wet environment.
• Ensure good lighting.
• Do not use in the vicinity of combustible fluids or
gases.
• When working outdoors, anti-slip footwear is rec-
ommended. Tie long hair back in a hair net. Avoid
abnormal posture
• The operating person must be at least 18 years of
age; trainees must be at least 16 years, however
only under supervision.
www.scheppach.com
.
2
GB | 17