Mechanical Attachment To Robotino; Floor Options - Festo Robotino 8049096 Descripción

6.4 Mechanical attachment to Robotino®
1 Remove the M4 x 8 mm fillister-head screw from the cover.
2 Position the contact plug on the cover with the cables going off to the right.
3 Secure the contact plug with the M4 x 24 mm socket head screw.
Note
Attachment is also possible without wheel cover. In order to reduce the risk of pinching the use of
the wheel cover is recommended.

6.5 Floor options

Rubber feet for smooth, hard floors
(already attached)
© Festo Didactic 8049097
Velcro strips for short pile carpet
(shipped loose)
27