Publicidad
Step 3
Fasten ten ANGLE BRACKETS (27G) to the ENDS (A and B) and
å
SHELF (G). Use ten BLACK 9/16" LARGE HEAD SCREWS (1S).
NOTE: Be sure the edges of the ANGLE BRACKETS are even
å
with the edges of the ENDS and SHELF.
Fasten the SMALL END MOLDINGS (R) to the ENDS (A and B).
å
Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
NOTE: The SMALL END MOLDINGS do not have holes. Turn the
å
screws into the grooves of the MOLDINGS. Do not over tighten.
BLACK 9/16" LARGE HEAD SCREW
(14 used in this step)
The grooves in the MOLDINGS (R)
should be closer to the top edges.
These edges
should be even.
R
27G
www.sauder.com/services
1S
R
A
B
G
27G
(10 used)
414729
Some assembly
(and snacks) required.
27G
Page 7
Publicidad
