Axess PARTY FLAME Serie Manual Del Usuario página 4

PFBT7002
Party Flame Portable Bluetooth Speaker
Rear Panel Function Layout
1- Power Switch: Press this switch to turn on and off the speaker. Before powering on the
speaker, make sure the volume level is turned down to prevent damage to the amplifier
or the speaker.
2- DC 15V Charging Input Jack.
3- Charging indication: The Blue light flashes during charging and is always on when fully
charged.
4- Insert Microphone to the front panel (Mic Jack), adjust Mic Vol. and echo to the best
level.
5- Guitar Input Jack.
6- Line Input: Connect your smartphone, MP3 Player, Laptop or other audio devices.
7- USB Flash Drive Input: Insert your USB flash drive into this slot. The unit will only read
MP3, WAV, WMA files. The maximum storage size of the USB flash drive cannot exceed
32GB. Do not attempt to connect a computer to the USB input as the speaker will not
be able to connect to a computer.
8- TF Input: Insert your TF Card to this slot. The unit will only read MP3, WAV and WMA
files from the TF Card. The TF Card cannot exceed 32GB.
9- Microphone Volume Knob: Use this knob to adjust the microphone volume level.
10- Mode Selector: Press this button to switch between USB, TF and Bluetooth Inputs.
11- Rec Button: Press and hold for 3-5 seconds to begin recording on to the USB Flash
drive or TF Card.
12- Previous Track: When using the speaker in USB / TF Card & Bluetooth mode, press
this button to go to the previous track.
EN
User Manual
2