Soundmatters SLIMstage 30 Manual De Operación página 6

E. EQ REMOTE for Remote Control
SETUP
LANGUAGE
Set Equalizer for EQ Button on REMOTE Control
DISPLAY
ROOM
SUBWOOFER Design an EQ especially for a favorite activity, perhaps action movies,
EQ REMOTE
ADVANCED news or classical music. Then with the press of the EQ button on the
Remote Control you can activate this special EQ.
EQ RESET
}}Action: Navigate to EQ REMOTE and press ENTER.
Result: 10 frequency equalizer will be displayed
Tip: EQ adjustment is real-time so make sure you play
the favorite activity while making the adjustment.
}}}Action: Move each slider to desired level, press ENTER
Result: Sets the EQ button response and display will
revert to main SETUP menu.
}}Action: Press EXIT
SETUP
Result: Exits SETUP menu
LANGUAGE
– OR –
DISPLAY
ROOM
}}Action: Navigate to ADVANCED setup and press ENTER.
SUBWOOFER
EQ REMOTE
Result: Displays ADVANCED setup setup options
ADVANCED
F. ADVANCED SETUP
ADVANCED
Set DEFAULT INPUT
DEFAULT INPUT
INPUT PARAMETERS
REAR
SLIMstage always returns to DEFAULT INPUT from standby/off
IR
LOCK
VERSION }}Action: Navigate to DEFAULT INPUT and push ENTER
RESET
Result: Shows all available inputs and last selected.
DEFAULT
Tip: LAST SELECTED is the normal factory setting.
LAST SELECTED
A1
}}}Action: Navigate to desired DEFAULT INPUT and push
A2
A3
ENTER
D1
D2 Result: Shows new Default Input and reverts to
D3
ADVANCED setup menu
Set PARAMETERS for Each Input
ADVANCED
Individually fine-tune the characteristics of each of your inputs.
DEFAULT INPUT
INPUT PARAMETERS
REAR
}}Action: Navigate to INPUT PARAMETERS, press ENTER
IR
LOCK Result: Display shows available inputs for INPUT PARAMETERS
VERSION
RESET selection
INPUT
Select INPUT to be Updated
A1
A2
}}Action: Navigate to desired input and push ENTER
A3
D1
Result: Displays input setup options
D2
D3
Note: Modifying the active input and playing music or movies allows
for real-time adjustment of the Sensitivity and Input EQ.
Input SENSITIVITY Adjustment
A2
The input sensitivity level of Analog Input A1, A2, A3 can be adjusted.
SENSITIVITY
SURR DEFAULT
In addition, Analog A2 has a –20dB attenuator that can be switched
EQ
HIDE
for use with speaker level output.
RESET INPUT
}}Action: Select SENSITIVITY
A2
Result: SENSITIVITY options display
–5......... 0 .........5+
AT TEN: –20DB
ON OFF
Create Speaker Level Input
A2 Input only, can accept a speaker level signal if connecting
speaker level ON is selected for A2 SENSITIVITY.
Note: You will need to adapt connection from speaker wires to
a stereo mini-jack. Contact Customer Support for questions
10
Select SURROUND MODE (Stereo, Music, Live, or
A2
Movie) as the default surround playback processing
SENSITIVIT Y
SURR DEFAULT
EQ
}}Action: Navigate to SURR DEFAULT and press ENTER
HIDE
RESET INPUT
Result: Surround options displayed
A2
}}}Action: Select desired default surround mode and press
LIVE
ENTER
MOVIE
LAST SELECTED
Result: SLIMstage will always select your input default mode
STEREO
MUSIC
at turn-on.
Tips:
1. Of the surround modes, Music is the most subtle, and Movie,
the most enveloping.
2. Regardless of the default, you can select any mode via the remote.
Set INPUT EQ
A2
SENSITIVIT Y While not recommended for most applications, individual default
SURR DEFAULT
EQ input EQ can be set for each source. If you select to use Input EQ,
HIDE
the Room EQ function will be disabled and EQ will need to be set
RESET INPUT
for each input individually.
A2 RESET
}}Action: Navigate to input EQ and press ENTER
Result: 10 frequency equalizer will be displayed
}}}Action: Move each slider to desired level, press ENTER
Result: Sets the EQ for the selected Input, this EQ will be
active when ever the modified Input is selected.
Note: To disable the Input EQ's and restore the Room EQ, select Reset
Input or RESET ALL TO FACTORY is required
HIDE INPUT
A2
Hiding an Input means that if you sequence through the sources on the
SENSITIVIT Y
SURR DEFAULT
Source front panel source button, the "hidden" input will be skipped.
EQ
HIDE
Similarly, there will be no response if that source is selected on the
RESET INPUT
remote.
A2
}}Action: Navigate to HIDE input and press ENTER
SHOW
HIDE
Result: HIDE input options will be display
}}}Action: Select HIDE or SHOW and press ENTER
Result: If HIDE is selected, the Input will be disabled and can
not be selected by the Remote Control.
CAUTION: Careful with this one... if you hide an input, its ability
to be seen virtually disappears unless you "un-hide" it in the Setup
Input Preferences or reset all setup functions to Factory Default
RESET INPUT to Factory Default Settings
A2
SENSITIVIT Y
Resetting to Factory Default will un-do any set-up adjustments you've
SURR DEFAULT
EQ made for that input.
HIDE
RESET INPUT
}}Action: Select RESET INPUT (to factory default) and press ENTER
Result: RESET INPUT options will display
A2
NO
YES
}}}Select YES or NO
Result: If YES, factory default settings for this input will be
reinstated.
English