Soundmatters Foxl Guia De Instalacion página 6

Battery Charging & Power Use
For INITIAL CHARGING, use wall-socket AC and the foxL power supply. Allow about 4 hours
(until LED goes green). Subsequent rechargings using AC will require only about 1 hour.
5V Power Supply Input
(connect to 5 V power supply
to wall AC and foxL)
Power notes:
• A fully charged battery will play up to
5 hours, depending upon volume levels.
• During the last 10% of a charge, output
volume will be reduced.
• Power output is doubled when it is
connected to wall AC, enabling it to play
3 decibels louder than with battery power.
English
LED Charge Indicator
RED = charging;
GREEN = 100% charge;
BLINKING RED = using
more power than
incoming
Low Battery
Indicator
BLINKING RED = charge battery
USB Input for Charge/Power
• During non-use, USB recharging takes
about 4 hours, depending upon current
available at USB port.
• USB charges to 95% of full capacity,
and LED may stay red
5