General Safety Instructions; Safety Instructions; Relating Specifically To - Meister basic BMT 250 Traducción De Las Instrucciones De Servicio Originales

MB-5410400-Bediene-0909.qxd
g Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
5 Service
a Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
b To avoid hazards, damaged power
leads must be replaced by the
manufacturer or his customer service
representative.
6 – Safety instructions

relating specifically to

the equipment
• Use the machine for its intended
purposes only.
• When the machine is in operation,
grasp it with both hands and take a
firm stance.
• Power sockets for use out of doors
must be fitted with residual-current
circuit breaker.
• Never remove chippings or debris
when the machine is running.
• Be sure to remove the power plug
before starting to work on the machine,
during any work breaks or when the
machine is not in use.
• Always keep the power cable well
away from the drilling zone.
04.09.2009 14:55 Uhr
• Make sure the machine is turned OFF
before plugging it into the power supply.
• Do not use the appliance in the rain
or wet.
• Wear safety glasses! Risk of injury
from split off or flying material parts.
• Secure the workpiece. A workpiece
held with a clamping fixture or a vice
is more securely held than with your
hand, and you have both hands free
to guide the machine securely.
• Do not work on damp materials, e.g.
wallpaper or damp areas.
• Do not use liquids containing solvent
to dampen the surfaces to be worked
on. The heat generated while working
may generate toxic vapours.
• Never machine material containing
asbestos!
• Keep appliance and tools away from
children.
• Do not allow persons under 16 years
of age to use the machine.
• Observe general safety instructions
for handling power tools!
• Hold the tool by the insulated handle
surfaces when carrying out tasks
during which it is possible that the
tools will come across hidden power
cables or its own cable. Contact with
a power-carrying cable can also put
metal parts of the unit under power
and cause an electric shock.
• Only use the electrical tool for dry
sanding. Water entering into an
electrical device will increase the risk
of an electrical shock.
Seite 51
51