Dmx Linking - Chauvet DJ 4BAR USB Guía De Referencia Rápida

4BAR USB QRG

DMX Linking

Starting
Address
Master/Slave
Connection
Infrared
Remote
Control
D-Fi USB
Connectivity
The 4BAR USB can work with a DMX controller when linked by DMX serial
connections. Instructions for DMX operation are in the User Manual. A DMX Primer is
available from www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest recommended DMX
address is 498.
The 4BAR USB uses the DMX data connection for its Master/Slave mode. Instructions
for connecting and configuring this product for Master/Slave operation are in the User
Manual.
The 4BAR USB is fully compatible with the Infrared Remote Control (IRC-6) from
CHAUVET DJ For more information on the IRC-6 or to download instructions, go to
www.chauvetlighting.com.
The 4BAR USB is able to become a D-Fi wireless receiver/transmitter with the use of the
D-Fi USB from CHAUVET DJ. Simply set the DIP switch D-Fi receiving/transmitting
channel, plug it into the USB port then set the product's DMX Personality and DMX
Address. Further instructions for connecting and configuring this product for D-Fi USB
operation are in the User Manual.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port.
Doing so may cause damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX, manual
display control/menu buttons and IRC-6 will be unavailable until you unplug the
D-Fi USB. The priority levels are:
1. D-Fi USB
2. Wired DMX
3. IRC-6 Remote Control
4. Manual Digital Display/Menu Buttons
5
EN