Step-by-step installation guide
Step 2. Ventilation types (choose A, B or C)
This microwave oven is compatible with the following three types of ventilation:
A. Outside top exhaust
(vertical duct)
C. Outside back exhaust
NOTE
This microwave is shipped assembled for Recirculating. An Exhaust Adaptor is
shipped assembled and attached to the filler-upper. Select the type of ventilation
required for your installation and proceed to that section.
12 English
Install_ME11A7510DS_AA_DE68-04709A-00_EN+MES.indb 12
Install_ME11A7510DS_AA_DE68-04709A-00_EN+MES.indb 12
B. Recirculating
(non-vented ductless)
Bracket
(horizontal duct)
A. Outside top exhaust (vertical duct)
A1. ADAPTING THE COVER PANEL FOR THE EXHAUST ADAPTOR
Cover
Panel
Back
Panel
1.
Remove 1 screw from Cover Panel
and take off Cover Panel.
2.
Remove 1 screw from Back Panel.
3.
Assemble the Cover Panel as sliding
from top to bottom and the screw
that was removed from Back Panel.
2021-06-16
2021-06-16
10:55:29
10:55:29