Lenco BTP-400 Manual Del Usuario página 4

BLUETOOTH CONNECTION
Power button/
Multi -Function button
(Power on/off)
Master
Step 1 Power On
Long press master and Slave "O" simultaneously for 2S, you will hear a prompt
tone of power on. Then the speakers will be connected automatically with a beep
sound and the indicator light of Slave will keep blue, master indicator light will
keep flashing.
Bluetooth
My Device
Step 2 Choose the device
Lenco BTP-400
Find Lenco BTP-400 in your bluetooth list
and select it
Step 3 Pairing Success
The LED indicators on both speakers will
keep blue once bluetooth is paired and a
beep sound will be heard. You can play
music now.
Indicator
Sub-master
4
TWS CONNECTION
Indicator
TWS
Master and sub-master
Operation Instructions
1. Long press master and slave "O" simultaneously for 2S to power on. Then the
speakers will be connected automatically with a beep sound and the indicator
light of sub-master will keep blue, the master's indicator will continue to blink.
(Please turn off bluetooth on your device before TWS paired)
BASIC OPERATION
2
1
3
① Power Button/Multi-function Button
1
Long press for 2s to Power On/ OFF
●
1
Short press to play/pause during music playing
●
1
Short press on master speaker to answer/end an incoming call
●
Short press 1 twice on master speaker to reject a call
●
Short press twice to disconnect bluetooth
1
●
Short press three times to disconnect TWS
1
●
② ③ Volume Button
Short press to turn the volume up/Long Press
2
●
Short press to turn the volume down/Long press
3
●
Short press simultaneously to turn on/off flashing white LED during
2 3
●
music playing
Note: Both speakers can be controlled mutually after paired.
If you are not able to connect two speakers successfully,
long press 2 3 simultaneously of each speaker for 3S to connect quickly.
to next track
2
to previous track
3
5