Technical Data; Noise Information; Vibration Information; English - AEG BK18C Manual Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 27

TECHNICAL DATA

Inflator
Production code
Battery voltage
Rated input
Max. operating pressure
Air delivery rate
@ 90 psi / 6,21 bar / 621 kPa
Air delivery rate
@ 35 psi / 2,41 bar / 241 kPa
Recommended Ambient Operating Temperature
Recommended battery types
Recommended charger
Pressure hose length
Weight without battery
Weight according EPTA-Procedure 01/2014 (Li-Ion 2,0 ... 9,0 Ah)

Noise information

Measured values determined according to EN 62841. Typically, the A-weighted noise levels of the tool are:
GB
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!

Vibration information

Vibration total values (triaxial vector sum) determined according to EN 62841
Vibration emission value ah *
Uncertainty K=
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 62841
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for di erent applications,
with di erent accessories or poorly maintained, the vibration emission may di er. This may signi cantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is
running but not actually doing the job. This may signi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the e ects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
Wear ear protectors! Exposure to noise can cause hearing loss.
WARNING! Read all safety warnings, instructions,
illustrations and speci cations provided with this power
tool. Failure to follow all instructions listed below may result in
electric shock, re and/or serious injury..
Save all warnings and instructions for future reference.
INFLATOR SAFETY WARNINGS
Always wear goggles and ear protection when using the machine.
Do not leave the appliance unsupervised when it is switched on.
Never direct any compressed air or blow any dust toward people
or animals.
Do not use the device in rooms with a potentially explosive
atmosphere.
Risk of Bursting. Do not overin ate. Follow all manufacturer's
instructions for the item. Do not set the tool to an output pressure
greater than marked maximum pressure of item to be in ated.

English

12
Never block or plug the air outlet during operation.
Check air hose for wear or damage before each use. Check all
accessory connections are secure.
This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children
without supervision.
Have damage repaired immediately by an authorised workshop.
Following 5 minutes of continuous operation, a short break of at
least 5 minutes must be taken to allow the device to cool down.
Remove the battery pack before starting any work on the
appliance.
BK18C
4778 18 02...
... 000001-999999
18 V
225 W
150 PSI; 10,34 bar
14 l/min
23 l/min
-18°C ... +50°C
L1820R - L1890R; L1820S
BL1218; BLK1218;
AL1218G; AL18G
51 cm
1,05 kg
1,52 ... 2,21 kg
89,0 dB(A)
100,0 dB(A)
4,0 m/s
2
1,5 m/s
2

Publicidad

Tabla de contenido
loading

Tabla de contenido