• Do not try to repair the appliance on your own. Always contact an au-
thorized technician. If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly qualified persons to
avoid a hazard.
Unpacking the Applianc
Unpacking the Applianc
Unpacking the Appliance e e e
Unpacking the Applianc
• Remove the appliance from its packaging.
• Remove all packaging material, such as foils, filler
and cardboard packaging.
• To prevent hazards, check the appliance for any
transport damage.
• In case of damage, do not put the appliance into
operation. Contact your distributor.
NOTE
NOTE: : : :
NOTE
NOTE
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter "Cleaning and Maintenance".
Appliance Equipment
Appliance Equipment
Appliance Equipment
Appliance Equipment
Appliance Overv
Appliance Overview
Appliance Overv
Appliance Overv
iew
iew
iew
1 1 1 1 Door handle
2 2 2 2 Control panel
3 3 3 3 Base board
4 4 4 4 Water tank opening
5 5 5 5 Salt container
Delivery scope
Delivery scope
Delivery scope
Delivery scope
1x dishwasher basket, 1x cutlery shelf, 1x salt funnel
tube, 1x inlet hose, 1x drainage hose (incl. mounting
material)
6 6 6 6 Detergent hollow
7 7 7 7 Dishwasher basket
8 8 8 8 Upper spray arm
9 9 9 9 Lower spray arm
10 Filter system
10
10
10
WARNING:
WARNING:
WARNING:
WARNING:
The unit must not be connected to the mains during
installing. Otherwise there is danger to life
shock hazard!
shock hazard
shock hazard
shock hazard
CAUTION:
CAUTION:
CAUTION:
CAUTION:
For a correct operation the appliance must be con-
nected properly. The specifications for water supply
and drain as well as the electrical connection must
fulfill the required criteria.
Installation location
Installation location
Installation location
Installation location
• Place the appliance so that all controls are easily
to reach and the appliance door can open without
being impeded.
• Take care of a solid and horizontal position of the
appliance.
• Power cord and water hoses may not kinked or
squashed.
• Avoid the installation:
Avoid the installation:
Avoid the installation:
Avoid the installation:
near heaters, next to a stove, direct sunlight or
-
any other heat sources;
at locations with high humidity (e.g. outdoors),
-
as metal parts would be susceptible to corro-
sion under such circumstances;
in rooms where the temperature could drop
-
below freezing. Do not expose the appliance
any weather.
near volatile or flammable materials (e.g. gas,
-
fuel, alcohol, paint, etc.).
69
Installation
Ins
Ins
Ins
tallation
tallation
tallation
danger to life or electric
danger to life
danger to life
electric
electric
electric