Display Information - ESKUTE ES MAX Manual Del Usuario

2.3 Display Information

The ESKUTE ES MAX display features several different elements. Be sure you understand these before
attempting to ride. Press and hold the power button approx. 3~5 seconds to turn the scooter on/off.
1. Battery Level Indicator - This icon indicates how much battery life you have left.
As power goes down, the icon will
indicate different levels.
2. Speedometer - These numbers indicate the current speed and will change
when the ESKUTE ES MAX is in use. Readings are measured in mph or km/h.
When the battery level is low, stop riding, turn off the
scooter, and fully recharge it before riding again.
3. ASSEMBLY & FOLDING
Ensure the ESKUTE ES MAX is off before working with any of its parts. The scooter comes mostly
assembled within the package. Some minor assembly is required before riding. All parts and tools are
included.
3.1 Install the scooter.
Take the scooter out of the package carefully. Then put the stem up.
3.2 Install the screws.
Unpack the small bag, install the four screws with the included hex wrench to the stem and tighten
it to fix it. (two at the front and two at the back)
Tip: You need to tighten 4 screws to ensure the stability of the scooter installation. (Included in the
package.)
Standing
Step 1. Locate the kickstand on the side of the scooter's deck.
Step 2. Push the kickstand down and away from the scooter
then carefully lean the weight of the scooter onto the
kickstand.
Folding
Step 1. Press the red latch, pull the quick release outward,
and fold the stem.
Step 2. Line up the handlebars with the rear bumper so that
the lock connects to the hook.
Unfolding
Step 1. Press the latch on the handlebar so that it detaches
from the hook.
Step 2. Pull the stem up away from the deck.
Step 3. Press the quick release into place to finish.
Before moving, lifting, or otherwise transporting the scooter,
ensure it is turned off.
- 04 -
2
1