B When "MULTI CHANNEL" is selected, use the • and ª cursor
buttons to select the item to be set, then press the ENTER
button.
SPEAKER CONFIGURATION
Use this to select the types of the different speakers.
CHANNEL LEVEL
Use this to adjust the output level of the different speakers.
DELAY TIME
Use this to set the distance from the different speakers to the
listening position.
To exit the SPEAKER SETUP mode
Use the ª cursor button to select "AUDIO SETUP" then press
ENTER button.
B When "SPEAKER CONFIGURATION" is selected, use the • and
ª cursor buttons to select the speaker to be set then press the
ENTER button.
• The type of speaker used for the front speakers, center speaker,
subwoofer and surround speakers can be set. Use the • and ª
cursor buttons to select the speaker type, then press the ENTER
button.
LARGE
Select this when a large speaker is connected.
SMALL
Select this when a small speaker is connected.
NONE
Select this when no speaker is connected.
YES
Select this when a subwoofer is connected.
NO
Select this when no subwoofer is connected.
• When "FILTER" is selected:
ON (Factory default)
Set to "ON" to play sources in the Dolby Digital and PCM multi-
channel modes.
3
OFF
DTS recommended all-channel full band playback setting.
(Note that the subwoofer's volume is increased by 5 dB.)
Set this to play DVD audio 6-channel sources recorded in all-
channel full band frequencies.
When "OFF" is set, the speaker size is set to "LARGE" for all
the speakers and the subwoofer setting is set to "YES".
To play this type of software, read the software's instructions
carefully and make analog connections.
Press the RETURN button to return to the "SPEAKER SETUP"
menu.
B When "CHANNEL LEVEL" is selected, use the • and ª cursor
buttons to select the speaker to be adjusted, then use the
cursor buttons to set the level.
1
TEST TONE
• Use the
and
0
seconds or 10 seconds for the test tone, then output the test
tone using the procedure described below.
Front speaker (L)
Center speaker
Front speaker (R)
Surround speaker (R)
Surround speaker (L)
Subwoofer
• The volume level output from the front speakers (left and right
channels), center speaker, surround speakers (left and right
channels) and subwoofer can be adjusted.
• The volume level can be adjusted between 0 and -10 dB in steps
of 1 dB.
Press the RETURN button to return to the "SPEAKER SETUP"
menu.
cursor buttons to select off, 2 seconds, 5
1
Remote control unit
SP EAKE R SE TUP
SPE AK ER CONF I GURAT I ON
CHANNE L L E VE L
DE L AY T I ME
AUD I O SE TUP
SE L ECT :
SP EAKE R SE TUP
SE L ECT :
and
0
Remote control unit
SP EAKE R SE TUP
SE L ECT :
ENGLISH
ENTER
Remote control unit
B
DEC I S I ON : ENTER BUT TON
B
SPE AK ER CONF I GURAT I ON
F RONT SP
L ARGE
CENT ER SP
L ARGE
SUBWOOF ER
Y ES
SURROUND SP
L ARGE
F I L T ER
ON
DEC I S I ON : ENTER BUT TON
B
CHANNE L L E VE L
T E S T TONE
OF F
F RONT L c h
0 dB
CENT ER
0 dB
F RONT R c h
0 dB
SURROUND R c h
0 dB
SURROUND L c h
0 dB
SUBWOOF ER
0 dB
DEC I S I ON : ENTER BUT TON
31