Publicidad
Idiomas disponibles
Idiomas disponibles
3915
BIMETALLIC CONTACT THERMOSTAT
DESCRIPTION
The bimetallic contact thermostat is particularly suitable for
temperature measurements on heating systems pipe. This product
has been designed according to EN 60730-1 and subsequent
revisions and EN 60730-2-9. In compliance with the applicable EC
directives.
CHARACTERISTICS
Power supply by 250V~
Mounting on pipes
Protection degree IP20.
Insulation class Type II (double insulation)
TECHNICAL DATA
(These data refer to test performed on Ø60 mm pipe)
MODEL
POWER SUPPLY
OUTPUT
MAXIMUM TEMPERATURE
REGULATION TEMPERATURE RANGE
TEMPERATURE DIFERENCIAL
TEMPERATURE RATE OF CHANGE
PROTECTION DEGREE
INSULATION CLASS
STORAGE TEMPERATURE
INSTALLATION
Before connecting the thermostat, make sure that the power supply voltage of the unit to be controlled
(boiler, pump, etc) is not connected and that it matches the indication given inside the appliance
(250V ~max).
Make also sure that units suits the thermostat contacts rating features (see technical data)
WARNING:
All the installations operations included in this manual, must be carried out by qualified personal only,
strictly complying with all safety and law provisions in force.
3915 00
NC1-2 16(2,5)A/250V~/ NO1-3 2,5A/250V~
Cut-off or switching contacts
80ºC
20ºC ~ 90ºC
8 ±3K
1K/min
IP20
Type II (double insulation)
-15 ~ 60ºC
R0
Pág.
3
Publicidad
