Main Components; Operation - Schulz MTS 150 Compact Manual De Instrucciones

7. MAIN COMPONENTS

7
1
1.
Cable with rod holder
2.
Ground cable (ground clamp)
3.
Welding current adjustment control (handle)
4.
ON/OFF selector switch
5.
Overheating indicator light
6.
Welding current control sight
7.
Transportation grip

8. OPERATION

The change of voltage 127/220 V is done by means of the selector switch located in the front part of the equip-
ment. According to the voltage provided by the local utility company, follow the procedures below:
ATTENTION
ries to the personnel involved in the activity.
• Never turn on the equipment to 220V of rated voltage if it is set to 127V. Caution: risk of fire!;
• Keep the equipment disconnected from the power supply while changing the voltage. Adjust/change the
rated voltage during the operation of the equipment is prohibited!
5
4
3
2
FIGURA 7.1
Follow the instruction below in order to prevent risk of fire, electric accidents or inju-
4
2
FIGURE 8.1
31
6
FIGURA 7.2
7
5
3
1