Technical Specifications - Montarbo DSI-22 Manual De Uso

DSI-22
13
11 COMBO INPUTS
Combo input connections for connecting audio sources to channels 1 and 2. Please,
make the connections with the sound card turned off.
12 HEADPHONE
Connect your headphones to this output. To control the output level, use the dedicated
knob or input gain of the sources you intend to listen to by using the headphones.
13 MONITOR
Connect your audio monitors to these balanced Left/Right outputs. To control the
overall output level, rotate the dedicated knob or correctly set playback volumes from
PC or your DAW control panel.
14 USB PORT
Connect this port to your PC to provide power and audio connection to your sound card.
12
14
USE WITH WINDOWS
Download the updated drivers from: www.montarbo.com
Install the drivers in your PC following the instructions.
Turn off the computer and connect your sound card using the provided USB cable.
Restart your computer, which will detect your sound card. Then make the necessary
settings to use your sound card.
USE WITH MAC
No additional dedicated drivers are required. Connect the sound card to your Mac USB port
and the system will be able to operate autonomously.

TECHNICAL SPECIFICATIONS

Sampling
24-bit / 192 kHz
Input 2 x Combo (XLR + 6.35mm jack)
Outputs
2 balanced jack outputs, headphones stereo output
Connection
USB 2.0
Buttons 2 x Line/Instrument, 48V, MONO
Knobs
2 x INPUT GAIN, MONITOR volume, MIX and HEADPHONE VOLUME
Dimensions
190x61x112mm
Weight 790g
Provided accessories
USB cable, 6.35mm to 3.5mm stereo adapter
User manual
13