Sauder Via 401442 Manual Del Usuario página 13

Cajón lapicero
Tabla de contenido

Publicidad

Step 9
Fasten the UPRIGHTS (A and B) to the bottom surface
å
of the 401447 Desktop. Tighten four TWIST-LOCK®
FASTENERS.
Fasten the BRACES (W) to the bottom surface of the
å
401447 Desktop. Use two BLACK 9/16" LARGE HEAD
SCREWS (1S).
To insert the drawer into your unit, tip the front of the
å
drawer down and drop the rollers on the drawer behind
the rollers on the unit. Lift the front of the drawer up and
slide it into the unit.
BLACK 9/16" LARGE HEAD SCREW
(2 used for the METAL BRACKETS)
www.sauder.com/services
1S
B
W
25 lbs.
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking
the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
Dowel end
401447 Desktop
A
1S
W
401442
®
FASTENER
Hey! It's starting to look
like something!
Page 13

Publicidad

Tabla de contenido
loading

Tabla de contenido