Technical Data - Blooma Shelby 74639 Manual Del Usuario

Safety Safety
These instructions are for your safety. Please read through
them thoroughly prior to installation and retain them for future
Safety Safety
reference.
Check the pack and make sure you have all of the parts listed.
These instructions are for your safety. Please read through
Remove all packaging, wrap etc from the product.
them thoroughly prior to installation and retain them for future
Decide on the appropriate location for your product.
reference.
CAUTION: IP54 is guaranteed when the product is properly
Check the pack and make sure you have all of the parts listed.
installed and sealed.
Remove all packaging, wrap etc from the product.
Always avoid the product to be located at corrosive environment.
Decide on the appropriate location for your product.
Caution: Ensure the cable is routed so it does not present a
CAUTION: IP54 is guaranteed when the product is properly
hazard (avoid dangling loops where the cable is likely to be
installed and sealed.
pulled/caught).
Always avoid the product to be located at corrosive environment.
Caution: Ensure the cable is routed so it does not present a
be replaced; if the cord is damaged, the luminaire must be
hazard (avoid dangling loops where the cable is likely to be
destroyed.
pulled/caught).
When the product does not light after installation:
> Ensure there is no electricity failure
be replaced; if the cord is damaged, the luminaire must be
> Ensure all the connections are secured
destroyed.
If you have any doubt about installation/use of this product,
When the product does not light after installation:
> Ensure there is no electricity failure
Always disconnect the product from mains at least 10 minutes
> Ensure all the connections are secured
allowing to cool down before any maintenance or adjustment.
If you have any doubt about installation/use of this product,
It is recommended to have a regular schedule of care and
maintenance to keep the surface condition well.
Always disconnect the product from mains at least 10 minutes
allowing to cool down before any maintenance or adjustment.
It is recommended to have a regular schedule of care and
maintenance to keep the surface condition well.
Warranty Period and Conditions Warranty Period and Conditions
At Blooma, we devote special attention to selecting high-quality materials and use manufacturing techniques that enable us to create
designer and durable product ranges.
Warranty Period and Conditions Warranty Period and Conditions
That is why we offer a 2-year warranty against product manufacturing defects. This product is under warranty for 2 years as from the date of
purchase, for normal, non-professional household use. The warranty shall only apply upon presentation of the till receipt or the invoice. Keep
At Blooma, we devote special attention to selecting high-quality materials and use manufacturing techniques that enable us to create
your proof of purchase in a safe place.
designer and durable product ranges.
The warranty covers product breakdowns and malfunctions under the condition that the product is used in accordance with its intended use
That is why we offer a 2-year warranty against product manufacturing defects. This product is under warranty for 2 years as from the date of
and subject to installation and maintenance in accordance with good practice and the information contained in the user's manual.
purchase, for normal, non-professional household use. The warranty shall only apply upon presentation of the till receipt or the invoice. Keep
This product must be installed so that it may be later removed without damaging it.
your proof of purchase in a safe place.
This contractual warranty does not cover defects and damage caused by the natural wear of parts, bad weather
The warranty covers product breakdowns and malfunctions under the condition that the product is used in accordance with its intended use
freezing, damage caused by water quality (hardness, aggressiveness, corrosion, etc.), by the presence of foreign bodies transported by
and subject to installation and maintenance in accordance with good practice and the information contained in the user's manual.
This product must be installed so that it may be later removed without damaging it.
negligence, accident or maintenance that is defective or does not comply with good practice or the information in the user's manual.
This contractual warranty does not cover defects and damage caused by the natural wear of parts, bad weather
The following are also excluded from the warranty: harmful consequences due to the use of accessories and/or non-original equipment
freezing, damage caused by water quality (hardness, aggressiveness, corrosion, etc.), by the presence of foreign bodies transported by
The warranty is limited to those parts recognised as defective. Under no circumstances shall it cover fringe expenses (travel, labour) and
negligence, accident or maintenance that is defective or does not comply with good practice or the information in the user's manual.
direct and consequential damage.
The following are also excluded from the warranty: harmful consequences due to the use of accessories and/or non-original equipment
This guarantee is in addition to and does not affect your statutory rights.
The warranty is limited to those parts recognised as defective. Under no circumstances shall it cover fringe expenses (travel, labour) and
direct and consequential damage.
This guarantee is in addition to and does not affect your statutory rights.
3663602892724-3663602892786-Blooma-A5-IM-V05.indb 3 KNG2109249_ONLINE.indd 3

Technical Data

Technical Data
Supply Voltage: 220-240 V~, 50 Hz
Technical Data Technical Data
1 x Max 7 W GU10. (check bulb dimensions
Bulb Type:
in relation to space available)
Supply Voltage: 220-240 V~, 50 Hz
This product complies with conformity
Conformity with all relevant EC Directive
requirements of the applicable European 1 x Max 7 W GU10. (check bulb dimensions
Bulb Type:
requirements.
Regulations or Directives.
in relation to space available)
Conformity with all relevant EC Directive
This product complies with conformity
Class I product, must be connected to earth.
requirements.
requirements of the applicable UK Regulations.
Minimum distance from lighted objects
Class I product, must be connected to earth.
(0.3 metres)
IP44
Splash-proof
Minimum distance from lighted objects
IP54
(0.3 metres)
Splash-proof
IP44
Splash-proof
Waste electrical products should not be
disposed of with household waste. Please
IP54
recycle where facilities exist. Check with your
Splash-proof
Local Authority or local store for recycling
Waste electrical products should not be
advice.
disposed of with household waste. Please
xxWyy xx-year; yy-week of the year
recycle where facilities exist. Check with your
Local Authority or local store for recycling
advice.
xxWyy xx-year; yy-week of the year
Light source replaceable by an end-user.
This product contains a light source of energy efficiency class E
16/04/2020 12:17 AM 18/06/2021 11:36