Publicidad
Idiomas disponibles
Idiomas disponibles
Quick guide Fte-WB3-11-LK
< Custom Charging
Single charging
Delay
0h
0h
Charging duration
0h
0h
Charging Amount
0Kwh
0Kwh
Start Charging
< Custom charging
Single charging
Timing
Repeat
Mon, Tue, Wen, Thu, Fri, Sat.
Charging duration
0h
0h
Charging amount
0Kwh
0Kwh
Enable
Repeated charging
24h
48h
100 KWh
Repeated charging
3:21 >
>
48h
100 KWh
-4-
There are three parameters that can be
set in custom charging single-time.
1. Delay:
With this setting you can delay the
loading process. You can delay
charging up to 24 hours.
2. Charging duration:
Set the maximum charging time.
Once the selected charging time has
expired,
the
terminates automatically the loading
function.
3. Charging amount:
The maximum charging power. If the
maximum charging power you have
selected is exceeded, the charging
station
stops
charging function.
There are four parameters that can be set in
user-defined cyclic loading.
1.
Timing:
Select the time at which the charging
process should start repeatedly.
2.
Repeat: Select the day(s) of the week
you want charging to start repeatedly.
3.
Charging duration:
Set the maximum charging time.
Once the selected charging time
has expired, the charging station
terminates
loading function.
4.
Charging amount:
The maximum charging power. If
the maximum charging power you
have selected is exceeded, the
charging
automatically
function.
charging
station
automatically
the
automatically
the
station
stops
the
charging
Publicidad
