Web Application - FONESTAR FCS-8250DS Manual De Usuario

4.- NO INTERNET ACCESS REQUIRED. To launch the Web application, open your PC's internet browser
(Google Chrome is recommended) and enter the IP in the address bar of the column (default 192.168.1.30)
and press ENTER to load the application.
NOTE: if the screen shown in the image does not load, check the network settings of the devices and
confirm that they are all on the same LAN and have different IP addresses.
5.- Select the language of the application: Spanish or English.
6.- Enter password. Default: 123123.
NOTE: If you do not remember your password after changing it, you can use 17909.
7.- And you can now make the necessary configurations in the WEB application.

WEB APPLICATION

This application has a menu with 3 options:
- SCENE for setting speaker directivity.
- SOUND to set frequency band equalization and volume.
- SET for network configuration, access password, and to enable initial check.
All changes made will take effect in real time except for the network and password changes that will need to
be confirmed by the SAVE button.
In the upper right corner of the application you will have the EXIT button to close the application when setup
is complete.
NOTE: The web application can be run from a PC, smartphone, or tablet as long as the control device and
columns are connected to the same LAN.
- 3 -
EN