Maintenance; Technical Specifications - Kunft KMC3833 Manual De Instrucciones

• Plug in, press the top cover downwards with one hand; slightly hold
the handle of the chopping bowl with the other hand while operating,
the appliance starts running.
• After you have completed chopping, release the top cover and
unplug the appliance from the outlet.
• WARNING: The continuous operating time must be less than 30
seconds.
• If your mini chopper gets blocked, first stop it and then unplug it
before clearing.
• After use, unplug and dismantle the main body and the bowl lid in
sequence, take the chopping blade unit out of the bowl by holding
the plastic shaft, then pour out the food.
• The edges of the blade are very sharp, do not touch them.
• Always switch off and unplug the appliance before cleaning it.
Please refer to the instructions in the "Maintenance" section.
Purpose
Chopping beef (less than 200 g), nuts, breads, vanilla, onions, e.g.
Processing guide
Food
beef pieces
(size 20 mm x 20 mm x 20 mm),
almonds.
WARNING:
Any other servicing should be performed by an Customer Support
Service.
Let the appliance rest at least 2 minutes between 2 cycles. After
operating 3 cycles continuously, the appliance needs to cool down to
room temperature to restart.
Never misuse this appliance. Care is needed when handling cutting
blades, especially when removing the chopping blade unit from the
bowl and during cleaning.

2.3. Maintenance

• Always switch off and unplug the appliance before cleaning it.
• Take the main body and the bowl lid off.
• Caution: Take care when cleaning the chopping blades as they are
extremely sharp.
• Note: Do not clean the main body of the mini chopper in the
dishwasher.
Max. time Max. quantity
30 seconds 200 g
12
mini chopper
• The main body can only be wiped with a damp cloth, then dry.
• Never immerse the appliance in water or other liquid or use
abrasives.
• The bowl lid, chopping bowl and the chopping blade unit can be
washed in water with a cleaning agent.
• Unplug the appliance and then let it cool down.
• Wash and rinse thoroughly with water, then dry.
Storage
Store in a cool, dry and ventilating place.

3. TECHNICAL SPECIFICATIONS

220-240 V 50-60 Hz 300 W
EN
KMC3833
13