Fan Speed - GE APCA10 Serie Manual Del Propietario Y Instrucciones De Instalación

Controls
Features and appearance may vary.
A
B
C
D
E
F
REMOTE CONTROL
2. Aim the remote control at the signal receiver on the
control panel to operate the air conditioner.
A. Power
Turns ON/OFF power to the air conditioner.
NOTE: Turning off power by pressing the Power button
does NOT disconnect the appliance from the power
supply.
• Press the Power button. The Power indicator will
illuminate.
B. Mode
Press the Mode button to toggle among the operating
options. The corresponding indicator will illuminate:
temperature
Cool – Cools the room to the set temperature
DRY – Reduces the humidity in the room
Fan – Circulates the air in the room without cooling
C. Temperature
Adjusts the Temperature or Hours in Time Delay.
To Set the Temperature:
The temperature can be set between 64ºF and 86ºF
mode.
1. Press the Mode button until the Cool mode is selected.
2. Press the Up Arrow or Down Arrow buttons to select the
Temperature.
6
Cool
Fan
Dry
Heat
NOTE: The temperature cannot be set when the air
conditioner is in either Fan or DRY mode.
D. Fan Speed
The fan speed can be adjusted from Low, Medium, to
High speed when the air conditioner is in operation.
NOTE: The fan speed cannot be adjusted when the unit
is in DRY mode.
• Press the Fan Speed button to toggle among the three
speeds. The corresponding fan speed indicator will
illuminate.
E. Timer
conditioner to turn Off or On. When a Time Delay is
programmed, the Timer indicator light will illuminate.
F. Swing Button
The louvers on your portable air conditioner will open
Use the Swing Button on your remote to adjust the
louvers in the position you would like them to be in, or to
operate in Swing mode the louvers will continue to move
up and down.
Swing

Fan Speed

C
49-5000635 Rev. 0