Telstar TBL012210MD Manual De Instrucciones página 11

BLENDER
TBL012210MD
BEFORE USING YOUR BLENDER
Importante:
Important:
Always ensure your blender is unplugged from the power outlet be-
fore fitting or removing the blade assembly.
Always hablde the blade assembly with caution, as the blades are
extremely sharp.
To assemble the blade system, operate as follows:
1. Place the blade assembly into the base of blender jar, as show
un Fig. 1
2. Ensure that the blade assembly is firmly in the place by turning it
counter clockwise as indicated by the arrow (as Fig 2)
USING YOUR BLENDER
1. Clean blender according to the instructions in the "Cleaning
and storage" section.
2. Place the blender jar on the motor bousing.
3. Remove the lid or the lid stopper from the blender jar, put the
ingredients into the jar.
4. Place the lid with the lid stopper back onto the jar. Do not
exceed the maximum indicated level 1.5 liters.
5. Pluge the cord into 120V 60Hz outlet only.
6. Press the OFF button when blending is finished.
Note: Do not blend ingredients more than 2 minutes or dry
ingredinets more than 30 seconds and let the unit cool completely
before next blending.
11