Introduction; Device Description; Scope Of Delivery; Proper Use - Scheppach HCE2600 Traducción Del Manual De Instrucciones Original

1. Introduction

Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regu-
lations and VDE regulations 0100, DIN 57113 /
VDE0113.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device.
The operating instructions are intended to help the
user to become familiar with the machine and take
advantage of its application possibilities in accord-
ance with the recommendations.
The operating instructions contain important infor-
mation on how to operate the machine safely, pro-
fessionally and economically, how to avoid danger,
costly repairs, reduce downtimes and how to in-
crease reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in
your country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information. The machine can only
be operated by persons who were instructed con-
cerning the operation of the machine and who are in-
formed about the associated dangers. The minimum
age requirement must be complied with.
18 | GB
In addition to the safety instructions contained in this
operating manual and the specific regulations of your
country, the technical rules generally accepted for
the operation of machines of the same type must be
observed.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
2. Device Description (fig. 1)
1 Handle
2 High-pressure hose
3 Cable holder
4 On/off switch
5 Wheel cover
6 Connection for high-pressure hose
7 Transport wheel
8 Lance holder
9 Cleaner container
10 Water supply connection
11 Nozzle cleaning needle
12 Patio cleaner
13 Pistol
14 Extension
15 Turbo nozzle
16 Nozzle
17 -
18 Cleaning brush
19 -
20 -
21 3 in 1 nozzle

3. Scope of delivery

• Operating manual
• Cleaning agent container
• Nozzle cleaning needle
• Patio cleaner
• Pistol
• Extension piece
• Turbo nozzle
• Nozzle
• Cleaning brush
• 3 in 1 nozzle

4. Proper Use

The high-pressure cleaner is designed to clean ve-
hicles, machines, buildings, facades, etc. in the pri-
vate sector.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufac-
turer will be liable for any damage or injuries of any
kind caused as a result of this.
www.scheppach.com