Parts Name - Sinbo SR 55 Guía De Uso

1. Door 2. Cabinet 3. Back cover 4. Control box 5. Control knob
6. lamp shade 7. Inner case 8. Fan cover 9. Rack 10. Drip tray
TIPS ON SETTING UP YOUR REFRIGERATOR
- Do not place the refrigerator under direct sunlight, or in a hot area (i.e. above
25) or in a humid place.
- Make sure your refrigerator is resting on a flat surface so that there is no
risk of bottles being able to tip forward.
- Remove all exterior and interior packaging, including protective foam on the
door panels. Remember that children are particularly vulnerable to packaging
materials and old appliances-discard materials with this in mind.
- Your refrigerator needs space around it to function properly. It is very
important that you give it at least 10cm between the back and any surface
behind it as well as 5cm between the sides and any surface around them. This
is necessary so that your refrigerator has adequate space for ventilation.
USING YOUR REFRIGERATOR
1) Connecting.
- First, connect the power.
- Find a suitable power outlet and make sure that your voltage is the same as
what is shown on your refrigerator's rating label.
2) Power.
- When you connect the power, your refrigerator will start working.
- The interior light will turned-on when the refrigerator start working.
3) Adjusting the temperature.
- You can adjust the interior temperature of your refrigerator by using the
temperature adjustor on the center bottom of the cabinet.ÔMAX' reduces the
temperature;ÔMIN' increase temperature ;ÔOFF' turn off it.

PARTS NAME

Control Box
Control knob
Lamp shade
- 10 -