Vitrifrigo VTR5090 DG Operacion página 4

GB
Operation
1: FAN BUTTON
2: FAN INDICATOR
Press and hold for about 1" to activate / deactivate the fans (optional) in the burner
compartment. Activation is showed by the flashing of indicator 2.
The default output is disabled.
3: ON / SET BUTTON
Press and hold to turn the fridge on and off completely
Short press to select a power source between AC / DC and GAS
The selected source is indicated by the activation of:
4: AC power source available and active
5: DC power source available and active
6: GAS power source available and active
If one of the power supplies is not available, the next one is automatically selected.
If both AC and DC power supplies are not available, only the GAS function remains active
and no other power supply can be selected.
During AC operation, if the power supply fails, it automatically switches to DC, but if AC
becomes available again, the unit will sense it and will go back to previous source.
During DC operation, if the power supply fails, it automatically switches to AC if present, or if
not available in AC the GAS LED will flash and it will be possible to be activated manually.
During GAS operation it is possible to switch to another power supply only manually,
if available.
Error type
Error type Remedy
Flashing GAS Power Indicator
Select an available power source.
9600-0067 Rev.00