Labelmate PM-300-LS Manual Del Usuario página 3

About your PM-300
The LABELMATE PM-300 printer mechanism is ready to be completed with the hardware of your
choice. Some examples are inkjet-heads, laser-encoders, barcode verifiers or RFID encoders.
GENERAL CONTENT OF THE PACKAGING
Remove all parts from the shipping container and verify content
• User Manual (this document)
• PM-300 Printer Mechanism Unit
• Power Cord
Retain the shipping container and packaging for storage and transport
FEATURES
• Designed for processing labels with a maximum width of 125 mm
• 1 Powerful motor, the PM-units are NOT Bi-Directional
• Maximum roll diameter : 300 mm
• Max label roll weight: 6 KG
• Print speed PM-300-LS: max 150cm/sec
• Print speed PM-300-HS: max 235cm/sec
• Max speed specified with a 76mm take-up roll diameter and reached at the end of the roll, in normal office room tem-
peratures and depending on performance of the chosen inkjet-head.
• Take up reel : The take-up torque is adjustable and it is possible to select wind-in or wind-out.
• Power Supply : 230VAC- 50-60Hz (115V on request)
• Comes standard for using cores in 76mm, 40mm included. On request available in 38/44/70/100 mm.
• Optional PC-2 Counter is a pre-set label counter that allows stopping the machine after a pre-set number of labels.
• Optional Encoder : 4096 pulses per revolution = linear resolution of 0.041mm
P/N MODEL
LMP003 PM-300-LS
LMP004 PM-300-HS
LMP007 PM-300-U-LS
LMP008 PM-300-U-HS
LS & HS-MODELS
DESCRIPTION
Reel to Reel Print Mechanism. Low Speed Model
Reel to Reel Print Mechanism. High Speed Model
Low Speed Model with Ultrasonic sensor for transparent labels
High Speed Model with Ultrasonic sensor for transparent labels
MAX SPEED
(cm/sec)
150
235
150
235
Labelmate.com