Operating Your Breast Pump; Cleaning Instruction; Long Term Storage - KIKKA BOO LEIA PLUS Instrucciones De Uso

5. Lock the milk bottle into the connector by rotating clockwise until tight.
• Check breast pump kit components for wear or damage before use. Replace if necessary.
• Always inspect all parts prior to use for cleanliness.
• To prevent damage to the breast pump all components must be completely dry before use.
V. OPERATING YOUR BREAST PUMP
Step 1- Place the breast shields on your breasts so that your nipples are properly centered in the tunnels.
Step 2- Hold the breast shield and connector onto your breast with your thumb and index nger. Support your breast with the palm of your hand.
Step 3- Turn on the breast pump by pressing the power button and choose the mode you prefer.
Step 4- Turn o the breast pump by pressing the power button after using and make the dust cap covered.
Notes:
1. Your breast pump will begin in Massage Mode. Adjust the pumping level using the (-)(+) controls to nd a comfortable level.
Massage Mode is fasting sucking pump rhythm to stimulate milk ow.
2. Aftertwo minutes, your pump will automatically transition to Pumping Mode. Adjust the pumping level using the(-)(+) controls to nd your maximum
con r Vacuum. If your milk begins to ow before two minutes, press the mode change button POWER
to manually transition to Pumping Mode.
Pumping Mode -slower sucking/pumping rhythm for gentle and e cient milk removal after milk has started owing.
3.0nce you are pumping in the Pumping Mode, increase the speed/vacuum (+) until pumping feels slightly uncomfortable(not painful), then decrease
(-)slightly.
4. You can switch to the Bionic Mode when the milk ow stops. Bionic Mode aims to trigger another let-down by combining fast and slow pumping
rhythms.
VI. CLEANING INSTRUCTION
Wash: Before rst use and after each use
Step 1-Rinse all separated parts that touch the breast and breast milk in cool water to remove breast milk residue
Step 2-Soak in warm soapy water for 5 minutes, then wash and rinse.
Step 3-Allow parts to air dry. Store dry parts in a cool place when not in use.
Do not store wet or damp parts.
Note:
• Take care not to damage parts of the breast pump kit during cleaning.
• Store the dry breast pump kit in a clean bag or container until next use.
• Wash hands thoroughly.
LONG-TERM STORAGE
Your breast pump contains a rechargeable battery. To preserve your breast pump, when not in use for an extended amount of time,
it will automatically transition into storage mode. Before storing your breast pump for an extended amount of time, remember to :
• Clean breast pump kit • Clean Breast Pump • Make sure breast pump battery is fully charged
TROUBLESHOOTING
If breast pump does not power on
• Check that the breast pump is plugged into a working electric outlet
• Check the USB cable is working for other device.
If there is low or no suction
• Check that all of the breast pump and kit connections are secure.
• Disassemble and assemble the pump set as directed in the How to
Use: Assembly, make sure app pieces are clean and not be damaged.
• While pumping, make sure the breast petal form a complete seal around thebreast.
If there Is a breast mllk over ow
• Turn o the breast pump and unplug the USB cable from the electrical outlet.
• Use a damp (not wet) cloth to wipe the breast pump.
• If there is milk in the tube: Remove tube from the pump unit as well as breast petal assembly
• When all components are dry, reassemble
VII. FRESHLY EXPRESSED BREASTMILK STORAGE GUIDELINES (FOR HEALTHY TERM BABIES).
2. Room temperature; 3. Cooler with ice pack; 4. Refrigerator; 5. Freezer; 6. 4-6 hours at 19-260C (66-780F ; 7. 24 hours at 150C (590F ;
8. 3-8 days at 40C (390F ; 9. 6-12 months at 0- -40C (-18- -200F ;
ENGLISH