shutdown instructions
Contact with muffler area can result in serious burns.
Exhaust heat/gases can ignite combustibles, structures
or damage fuel tank causing a fire.
• DO NOT touch hot parts and AVOID hot exhaust gases.
• Allow equipment to cool before touching.
• Keep at least 5 feet (1.5 m) of clearance on all sides of water pump
including overhead.
Pump output is controlled by adjusting engine speed. Moving the engine
speed lever in the "Fast" direction will increase pump output, and moving
the engine speed lever in the "Slow" direction will decrease pump output.
Use the following shutdown instructions:
1. Turn engine switch to "OFF".
2. After using the fire cart, wrap fire hose around hose holder, once the
engine is cold
3. Remove drain plug, flush pump with clean water, and then drain all
water from pump.
WARNING
19