Thank you for choosing our product. GENIUS is sure you will get
the performances you expect to satisfy your requirements. All our
products are the result of a many years' experience in the fi eld
of the automated systems, strengthened by being part of a world
leading group in this sector.
In the middle of the manual you will fi nd a detachable booklet
containing all the images for the installation.
The automated systems of the RAINBOW family are electro-me-
chanical barriers which have been designed and built to control
vehicle accesses.
A handy release device, protected by customised key, enables
you to move the rod by hand in the event of a power cut.
Thanks to the use of 24V motors and of the encoder (standard
supplied), all automated systems of the RAINBOW family are able
to guarantee very high safety levels.
IMPORTANT WARNINGS FOR THE INSTALLER
• Carefully read the whole manual before beginning to install
the operator.
• Store the manual for future reference.
• The correct operation and the declared technical specifi ca-
tions are only valid if the instructions given in this manual
are strictly observed and only GENIUS accessories as well
as safety device are used.
• To guarantee an adequate level of safety of the automated
system, the use of a control unit with an adjustable elec-
tronic clutch is necessary due to the lack of a mechanical
clutch .
• The automated system was designed and built to control
vehicle access. Avoid any other use.
• The operator cannot be used to move safety exits or gates
installed on emergency routes (escape routes).
• Do not transit when the rod is moving.
• Anything not expressly specifi ed in this manual is not per-
mitted.
1. DESCRIPTION
With reference to fi gure 1:
Pos.
Upright
Panel
Foundation plate (sold as a separate part)
Cover
Control unit enclosure
Rod fi tting cover
Rod (sold as a separate part according to installation
requirements)
Balance spring (sold as a separate part, number and
type according to rod type and to fi tted accessories)
Gearmotor
Encoder
Closing / opening travel limits
Safety switch for opening panel
Red edge (cover for optional luminous strip)
Release device
Compartment for buffer batteries (not supplied)
RAINBOW 324 C - RAINBOW 524 C - RAINBOW 724 C
Description
1.1 TECHNICAL SPECIFICATIONS
RAINBOW Model
Power supply voltage
Motor supply voltage (V )
Max. power at thrust (W)
Motor rated power (W)
Max. torque at 24V (Nm)
Operating rated torque (Nm)
Opening / closing nominal time
(sec)
Rod max. length (m)
Type and use frequency at 20°C
Daily max. cycles (cycles)
Operating ambient temperature
(°C)
Noise (dBA)
Protection class
Operator weight (Kg)
Dimensions
Time according to the type of deceleration being set.
Length referred to the passage width, rod length +300mm ap-
prox for Rainbow 324C and Rainbow 524C; rod length +400mm
approx for Rainbow 724C
1.1.1. P
L
RODUCT
IFE
The tables below indicate the product life, expressed in number
of cycles, according to the type of selected rod and to the acces-
sories fi tted to it:
RAINBOW 324 C - RAINBOW 524 C
Rod and accessory
2 to 3 meters
4 meters
5 meters
3 meters with foot
4 meters with foot
5 meters with foot
3 meters with 2 m skirt
4 meters with 3 m skirt
5 meters with 4 m skirt
RAINBOW 724 C
Rod and accessory
4 meters
5 meters
6 meters
7 meters
4 meters with foot
5 meters with foot
6.5 meters with foot
4 meters with 2 m skirt
5 meters with 3.5 m skirt
6.5 meters with 5 m skirt
The product life has been calculated at a temperature of
20°C on correctly installed operators, according to the
specifi cations indicated in the instructions.
Page 7
Guide for the installer
324 C
524 C
724 C
230V~ 50Hz / 115V~ 60Hz
24
280
480
160
220
155
140
370
30
75
140
2 to 3
4 to 8
7 to 11
3
5
7
Semi-intensive
1500
1000
500
-20 +55
<70
IP 54
66
72
See fi g.
See fi g. 2
3
Life (No. of
cycles)
1.500.000
1.300.000
1.100.000
1.300.000
1.100.000
800.000
1.300.000
1.100.000
800.000
Life (No. of
cycles)
1.300.000
1.100.000
850.000
500.000
1.100.000
850.000
500.000
1.100.000
850.000
500.000